Email and campaigns

Email campaigns

Contact lists, CSV import, segments, sending a campaign, the deliverability check, email verification and reports — newsletters and promotional mail on Meghly.

Campaigns send newsletters, offers or announcements to your customers at once. The flow: make a list and add contacts, make segments if you need them, then write the campaign, send it and read the report.

Sending a campaign needs at least one Verified domain. You do not need Meghly mail hosting for it: see Sender domain: send without mail hosting. If you also host mail with us, add the domain as in Business email.

Your first campaign in five steps

  1. Add a sender domain (Domains page) and publish its DNS records. Press Verify until it is green.
  2. Make a list and import your contacts (Lists page).
  3. Create the campaign (Campaigns page): lists, sender, subject, content.
  4. Read the deliverability check and fix what it points at.
  5. Press Send now or Schedule. Watch the report.

The Overview page under Campaigns shows the same steps and ticks them as you go.

Sender domain: send without mail hosting

A campaign is sent from an address on your own domain, such as news@shop.com. The domain can keep its mail at Google Workspace, Microsoft 365 or any other provider; it only has to let Meghly send for it.

  1. On Domains, click Add domain, enter the domain and untick "Receiving enabled". This makes it a sender domain: no mailboxes, no MX record.
  2. Publish the records shown on the domain's DNS tab:
    • SPF — a domain may have only one SPF record. If you already have one (for example v=spf1 include:_spf.google.com ~all), do not add a second: add a:<the host shown> inside it, before ~all.
    • DKIM — a TXT record that signs your mail.
    • DMARC — start with p=none.
    • Your MX stays as it is. Nothing about incoming mail changes.
  3. Press Verify. The domain becomes Verified when SPF and DKIM are right.

Use a sub-domain for campaigns, such as news.shop.com, so a problem with bulk mail never touches your main domain's reputation.

Limits of your Campaign plan

Each plan has a monthly number of emails, a number of contacts and a number of address checks. At the limit, sending or importing stops with a message that says what is left; nothing is lost. A Campaign-only account may add several sender domains. See the plans on Choose a plan.

From code or an AI assistant

Create an API key with the scope Manage campaigns (or Read campaigns for reports only) and use the campaigns API from your own code. To drive campaigns from Claude or ChatGPT, add YoMail's MCP server and sign in; see the MCP guide.

Making a list

On the Lists page, click New list and fill in:

  • Name — the list's name, for you.
  • Public name — the name recipients see on the unsubscribe page (empty: the name above).
  • Description — a short description.
  • Double opt-in — when on, contacts added one at a time first get a mail to confirm, and join the list only after clicking Yes, subscribe me. (CSV imports are not affected.)

A contact is Subscribed, Unsubscribed, Bounced, Complained or Waiting for confirmation. Campaigns go to Subscribed contacts only.

Adding and importing contacts

Open the list: Add a contact adds one at a time, Import CSV many at once. The CSV file's rules:

  • One column must be named email.
  • first name and last name columns are recognised.
  • Any other column (such as company or city) is kept with the contact and can be used in mail as {{ company }}.
  • A file holds at most 50,000 rows.
contacts.csv
email,first name,last name,city
rahim@example.com,Rahim,Uddin,Dhaka
karim@example.com,Karim,Hasan,Chattogram

After the import you see how many were added, updated, already on the list and rejected. Someone who unsubscribed earlier stays unsubscribed, even when imported again.

Keep only people who agreed to hear from you on your lists. Mail to bought or unconsented addresses brings complaints and bounces, and can stop your campaign by itself.

Segments: sending to part of a list

To send to some contacts rather than the whole list, make a segment on the Segments page — such as "customers in Dhaka who opened mail last month". A segment draws from one list and has one or more conditions (Match chooses all of them or any):

ConditionExample
A column's valuecity is Dhaka, or company is filled
A taghas, or does not have, a tag
Opened an emailin the last 30 days, or not
Clicked a linkin the last 30 days, or not
Joined the liston or after a date, or before
Verificationthe address was verified as valid

Making and sending a campaign

Create a campaign on the Campaigns page. It has two steps:

1. Details & audience — who it goes to, and from whom:

  • Send to these lists; But not to these lists to leave people out; And these saved segments to add segments.
  • From name, Sender local part (such as news) and Verified sender domain make the sender's address, such as news@shop.com.bd. For replies to another address, set Reply-to.

2. Content — the message:

  • Subject and Preheader (the short text next to the subject in the inbox).
  • HTML and Plain text — keep both, as some mail apps show only text.
  • Track opens and Track clicks are on by default.

Meghly adds an unsubscribe link to the foot of every message (your own {{unsubscribe_url}} is used if you put one in). The List-Unsubscribe headers behind Gmail's and Outlook's "Unsubscribe" button are always set too.

The deliverability check

Before sending, Meghly checks the campaign and scores it from 0 to 100. It looks at the domain's SPF/DKIM/DMARC, the sender, the subject line, the text, the links (blocklisted or not), images against text, a spam filter test and the recipients. Each part comes with advice. A low score never blocks sending, but asks you to confirm first.

When to send

In When, Send now starts sending within a minute; Schedule sends at the time you choose.

Sending speed

Mail goes out in batches of 25. To build a new domain's reputation slowly (warm-up), at most 50 messages go on the first day, then the daily cap grows (100, 200, 300, 500 … 10,000) and after a few weeks there is no daily cap. Your plan's hourly and daily limits apply as well.

Thousands of messages from a new domain on day one mostly end up in spam. During warm-up, start with your most active customers.

Automatic pause

After at least 200 messages, if complaints reach 0.3% or hard bounces pass 5%, Meghly pauses the campaign by itself and shows Paused by the platform — protecting your domain's reputation. Clean the list (see email verification below) and resume.

Reports

Open a campaign to see Sent, Delivered, Opened, Clicked, Bounced, Complained and Unsubscribed, how often each link was clicked, a chart of the first 48 hours, and every recipient's state. Download CSV downloads the report; Pause sending and Resume sending stop and restart a running campaign.

The suppression list

Addresses that hard bounced, complained of spam or unsubscribed go to the Suppressions page by themselves, and no more mail goes to them (for 3 days after a soft bounce). To stop mail to an address yourself, use Add suppression.

Email verification

Before sending to an old list or one from elsewhere, verify its addresses. On the Verification page, check one address, or upload a file (a CSV with an email column, or one address per line; up to 50,000).

Verification checks the address's form, that the domain exists and accepts mail (MX), whether it is a disposable address, a role address such as info@, and typos (gmial.com brings a "Did you mean" suggestion). Each result is Valid, Risky, Invalid or Unknown, and Results CSV downloads them.

How many addresses you can verify each month depends on your plan's credits; the page shows how many are left.

Signup forms, automations and A/B tests

Signup forms (Signup forms page): pick a list, write the heading and button, and copy the one-line code onto your website. It shows inline, as a pop-up, or you can share the form's own link. If the list asks people to confirm, they get the confirmation email first. Someone who unsubscribed or bounced earlier is never added back by a form. List the websites allowed to show the form, or leave it empty for any site.

Automations (Automations page): a welcome series. Choose a list, write up to 10 emails and the wait before each. Switch it on, and everyone who joins the list after that gets the series on their own schedule. People already on the list are not mailed. Anyone who unsubscribes stops receiving the rest. Automation emails count towards your monthly campaign allowance and follow the same sending limits as campaigns.

A/B subject test: on the Subject step of a campaign, fill in the second subject. Half of the audience (split by chance, the same person always in the same half) gets each one. The campaign report then shows opens and clicks for both, and marks a side as ahead once each has at least 100 delivered and the difference is 2 points or more. In this version the whole audience is split; choosing a winner and sending it to the rest is not automatic yet.

Follow-up phone calls (MeghlyVoice)

If you use MeghlyVoice for phone calls, a campaign can follow up by phone with the people who did not respond to the email.

  1. Connect: on the Voice follow-up page enter your MeghlyVoice address and API key (create the key in MeghlyVoice with the calls:read and calls:write permissions), press Test connection, and choose the outbound agent that will make the calls.
  2. Record consent: on a list's contact page use the phone button to add a number and tick that the person agreed to be phoned (and where). A number without recorded consent is never used. People who unsubscribed or complained by email are left out too.
  3. Choose when: on the campaign's Subject step set Follow-up phone call: 1 to 14 days after the campaign finishes, for people who did not open or did not click.
  4. See the result: the campaign report shows the calls: how many were answered, busy, no answer, and each person's result.

MeghlyVoice's own rules still apply: calling hours, its do-not-call list and your balance there. If the balance is empty the calls are not made and the report says why.

Write with AI

On the Subject step of a campaign, open Write with AI. Describe the email in a few words, choose Bangla or English and a tone, and press Write. You get three subject lines to pick from and a draft of the email. Nothing is sent: use the draft, read it, change it and save.

AI can make mistakes. Check every fact, price and date before you send. Give it facts only; it is told not to invent discounts or deadlines. Your contacts' data is never sent to the AI, only the notes you type.

Each account has a monthly number of AI drafts. The Write with AI box shows how many are left. It appears only when the platform owner has turned AI on.

When something goes wrong

What you seeCause and fix
"No verified sending domain yet"Add a domain on the Domains page and its DNS records, so it becomes Verified.
The campaign is Paused by the platformToo many bounces or complaints; verify the list, remove bad addresses, then resume.
The campaign goes out slowlyThe new domain's warm-up or the plan's limits apply; this is normal.
Some contacts get nothingCheck whether they are Unsubscribed, Bounced, Waiting for confirmation, or on the Suppressions list.
Many rows rejected in a CSV importCheck there is a column named email and the addresses are right.

Stuck?

Talk to our engineers directly — by phone or email.

01782618248shohag.meghly@gmail.com